Goro 2000-1

Goro 2000¹
Heavy Duty Hinged Belt Fasteners (Patented)
Fasteners made of stainless steel. Continuous bottom plate to ensure good alignment of the splice and easy introduction of the pin. Concealed staples and chamfered edges. Pre-mounted stainless steel staples.

Belt Thickness Range		Maximum Belt Tension		Minimum Pulley
INCH	mm	PIW	KN./m	INCH	mm
3/16 - 9/32	5 - 7	360	65	3 3/16	80

Connecting Pins
Flexible stainless steel Polymer-coated cable, 1/8" (3mm) diameter.
Grooved stainless steel rod.

Packaging
* Box of 4 complete joints with connecting pins
Lengths for standard belt width: 12" (300 mm), 18" (450 mm), 24" (600 mm), 36" (900 mm) , 42" (1050 mm), 48" (1200 mm).
* Special box for round baler press: Each box contains 6 complete joints
For use on 7'" (178mm) wide baler belts, plus 6 high
Manganese self-hardening steel rod.

Goro 2000¹Installation Tools

T183 Clamping Tool
Mounted in a vice or a small hydraulic press, it allows for the splicing of a 7" wide belt
(10 fasteners) in an easy and quick manual process.
Open ended, it allows continuous lacing of wider belts.

Hammer Tool T05/G20001 - FIX
Allows the installation of T05 and GORO 20001 fasteners with a hammer and punch.

Standard Lengths: 7" (175 mm), 13" (350 mm).
Open ended, it allows continuous lacing of wider belts.

T161 Hydraulic Machine
Ideal for customers who apply multiple splices on a daily basis.
Its hydraulic jack, with a manual reset allows the splicing of up to 8" (200 mm) wide belt
(12 fasteners).

T330 Clamping Tool
Mounted on a hydraulic or mechanical press, it allows for the splicing of a 14" (360 mm) wide belt (22 fasteners) in quick operations.