Titan 10H

Fasteners For Heavy Duty Conveyor Belts

Fasteners made of stainless steel or in high tensile steel (H.T.S.)
Pre-closed for easy installation.
Smooth loop design to extend connecting pin life.
Staples pre-mounted in staggered formation to increase joint strength, especially on worn belting, made of stainless steel.

Packaging
Box of 10 strips of 8" (200mm). Sufficient to lace 42" (1050mm) of belting)

Connecting Pins
15/64" (6 mm) diameter armored stainless steel cable.
9/32 (7 mm) diameter armored stainless steel cable.

Installation Hammer Tool: T10H/G20002 - FIX (patented)
Easy transportable, simple to operate and maintenance free, the T10H/G20002 FIX Hammer Tool
is able to install TITAN 10H fasteners and GORO G20002 fasteners in a single operation, with a punch and a hammer.
Open ended, it allows a continuous lacing for wider belts.

Standard Lengths:

42" (1050mm), 48" (1200mm)
54" (1350mm), 60" (1500mm)
Other lengths on request.

Staple Size	Belt Thickness Range		Maximum Belt Tension		Pin Diameter		Minimum Pulley Diameter
	INCH	mm	PIW	KN./m	INCH	mm	INCH	mm
20	3/16 - 19/64	5 - 7.5	800	140	15/64	6	10	250
22	19/64 - 3/8	7.5 - 9.5			15/64	6
24	3/8 - 1/2	9.5 - 12.5			9/32	7
26	1/2 - 9/16	12.5 - 14			9/32	7